To Next Page

To Previous Page

Setting up the monitor

This section describes attaching the monitor stand or wall mount and the options for connecting your monitor

to a PC, notebook, gaming console, or similar device.

WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper

workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort

Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is

available on the web at http://www.hp.com/ergo.

IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the

panel can cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will

not recover to its normal condition.

IMPORTANT: To prevent the screen from getting scratched, defaced, or broken and to prevent damage to

the control buttons, position the monitor facedown on a at surface covered with protective sheet foam or a

nonabrasive cloth.

Attaching the monitor stand

Correctly attaching your monitor stand is critical for safe use. This section describes how to safely attach a

stand.

TIP: Consider the placement of the monitor, because surrounding light and bright surfaces might cause

interfering reections.

NOTE: The procedures for attaching a monitor stand might be dierent on other models.

1. Position the monitor head facedown on a at surface covered by protective sheet made of foam or a

clean, dry cloth.

2. Slide the top of the mounting plate on the stand into the connector on the back of the panel.

6 Chapter 1 Getting started

Questions and Answers:

Need help?

Do you have a question about the HP P24h and is the answer not in the manual?

HP P24h Specifications

General