To Next Page

To Previous Page

state. The monitor wakes from Auto-Sleep mode when the computer sends an active signal to the monitor

(for example, when you activate the mouse or keyboard).

To disable Auto-Sleep Mode in the OSD:

1. Press the Menu button to open the OSD, or press the center of the OSD controller to open the OSD.

2. In the OSD, select Power.

3. Select Auto-Sleep Mode, and then select O.

Adjusting blue light output (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor

allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating

image while you read content on the screen.

To adjust the blue light output from the monitor:

1. Press one of the OSD buttons to activate the buttons, and then press the Menu button to open the OSD.

Select Color.

If you are using a controller, press the center of the OSD controller to open the OSD.

2. Select Low Blue Light from the setting options.

● Low Blue Light: (TÜV certied) Reduces blue light for improved eye comfort.

● Reading: Optimizes blue light and brightness for indoor viewing.

● Night: Adjusts to the lowest blue light and reduces the impact on sleep.

3. Select Save and Return to save your setting and close the menu. Select Cancel if you do not want to save

the setting.

4. In the Main menu, select Exit.

Adjusting blue light output (select products only) 17

Questions and Answers:

Need help?

Do you have a question about the HP P24h and is the answer not in the manual?

HP P24h Specifications

General