Static Virtual LANs (VLANs)
Overview
Overview
This chapter describes how to configure and use static, port-based and
protocol-based VLANs on the switches covered by this manual.
For general information on how to use the switch’s built-in interfaces, refer to
these chapters in the Management and Configuration Guide for your switch:
■ Chapter 3, “Using the Menu Interface”
■ Chapter 4, “Using the Command Line Interface (CLI)”
■ Chapter 5, “Using the HP Web Browser Interface
■ Chapter 6, “Switch Memory and Configuration”
2-2
To Next Page
Loading...
Need help?
General