EasyManuals Logo
Home>HP>Switch>ProCurve 5300xl Series

HP ProCurve 5300xl Series User Manual

HP ProCurve 5300xl Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Static Virtual LANs (VLANs)
VLAN Operating Rules
VLAN Operating Rules
DHCP/Bootp: If you are using DHCP/Bootp to acquire the switch’s
configuration, packet time-to-live, and TimeP information, you must des-
ignate the VLAN on which DHCP is configured for this purpose as the
Primary VLAN. (In the factory-default configuration, the DEFAULT_VLAN
is the Primary VLAN.)
Per-VLAN Features: IGMP and some other features operate on a “per
VLAN basis. This means you must configure such features separately for
each VLAN in which you want them to operate.
Default VLAN: You can rename the default VLAN, but you cannot change
its VID (1) or delete it from the switch.
VLAN Port Assignments: Any ports not specifically removed from the
default VLAN remain in the DEFAULT_VLAN, regardless of other port
assignments. Also, a port must always be a tagged or untagged member
of at least one port-based VLAN.
Voice-Over-IP (VoIP): VoIP operates only over static, port-based VLANs.
Multiple VLAN Types Configured on the Same Port: A port can
simultaneously belong to both port-based and protocol-based VLANs.
Protocol Capacity: A protocol-based VLAN can include up to three
protocol types. In protocol VLANs using the IPv4 protocol, ARP must be
one of these protocol types (to support normal IP network operation).
Otherwise, IP traffic on the VLAN is disabled. If you configure an IPv4
protocol VLAN that does not already include the ARP VLAN protocol, the
switch displays this message:
Indicates a protocol VLAN configured
with IPv4, but not ARP.
Deleting Static VLANs: On the 3400cl and 6400cl switches, and on
5300xl switches running a software release earlier than E.09.xx, if one or
more ports are assigned to a non-default VLAN, you cannot delete that
VLAN from the switch configuration until you first remove the port(s)
from the VLAN configuration. On 5300xl switches running software
release E.09.xx or greater, you can delete a VLAN regardless of whether
there are currently any ports belonging to that VLAN. (The ports are
moved to the default VLAN.)
2-13

Table of Contents

Other manuals for HP ProCurve 5300xl Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 5300xl Series and is the answer not in the manual?

HP ProCurve 5300xl Series Specifications

General IconGeneral
BrandHP
ModelProCurve 5300xl Series
CategorySwitch
LanguageEnglish

Related product manuals