GVRP
Overview
Overview
This chapter describes GVRP and how to configure it with the switch’s built-
in interfaces, and assumes an understanding of VLANs, which are described
in
chapter 2, “Static Virtual LANs (VLANs)” .
For general information on how to use the switch’s built-in interfaces, refer to
these chapters in the Management and Configuration Guide for your switch:
■ Chapter 3, “Using the Menu Interface”
■ Chapter 4, “Using the Command Line Interface (CLI)”
■ Chapter 5, “Using the HP Web Browser Interface
■ Chapter 6, “Switch Memory and Configuration”
3-2
To Next Page
Loading...
