Static Virtual LANs (VLANs)
Configuring VLANs
An asterisk indicates
you must reboot the
switch to implement
the new Maximum
VLANs setting.
Figure 2-13. VLAN Menu Screen Indicating the Need To Reboot the Switch
• If you changed the VLAN Support option, you must reboot the switch
before the Maximum VLANs change can take effect. You can go on to
configure other VLAN parameters first, but remember to reboot the
switch when you are finished.
• If you did not change the VLAN Support option, a reboot is not
necessary.
4. Press
[0] to return to the Main Menu.
2-23
To Next Page
Loading...
