HP ProCurve 5300xl Series User Manual

Stack Management for the Series 3400cl and 6400cl Switches
Configuring Stack Management
For status descriptions, see the table on page 13-44.
Figure 13-9. Example of the Stack Management Screen
2. Press
[A] (for Add) to add a Candidate. You will then see this screen listing
the available Candidates:
The Commander automatically selects an
available switch number (SN). You have the
option of assigning any other available number.
Candidate List
Figure 13-10. Example of Candidate List in Stack Management Screen
3. Either accept the displayed switch number or enter another available
number. (The range is 0 - 15, with 0 reserved for the Commander.)
4. Use the downarrow key to move the cursor to the MAC Address field,
then type the MAC address of the desired Candidate from the Candidate
list in the lower part of the screen.
5. Do one of the following:
13-17

HP ProCurve 5300xl Series Specifications

General

Brand	HP
Model	ProCurve 5300xl Series
Category	Switch
Language	English