HP ProCurve 5406zl Access Security Guide

Getting Started
Sources for More Information
■ Management and Configuration Guide—Use this guide for information
on topics such as:
• various interfaces available on the switch
• memory and configuration operation
• interface access
• IP addressing
• time protocols
• port configuration, trunking, traffic control, and PoE operation
• SNMP, LLDP, and other network management topics
• file transfers, switch monitoring, troubleshooting, and MAC address
management
■ Advanced Traffic Management Guide—Use this guide for information on
topics such as:
• VLANs: Static port-based and protocol VLANs, and dynamic GVRP
VLANs
• spanning-Tree: 802.1D (STP), 802.1w (RSTP), and 802.1s (MSTP)
• meshing
• Quality-of-Service (QoS)
• Access Control Lists (ACLs)
■ Multicast and Routing Guide—Use this guide for information topics such
as:
• IGMP
• PIM (SM and DM)
• IP routing
• VRRP
■ Access Security Guide—Use this guide for information on topics such as:
• Local username and password security
• Web-Based and MAC-based authentication
• RADIUS and TACACS+ authentication
• SSH (Secure Shell) and SSL (Secure Socket Layer) operation
• 802.1X access control
• Port security operation with MAC-based control
• Authorized IP Manager security
• Key Management System (KMS)
1-6

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM