HP ProCurve 5406zl Access Security Guide

Virus Throttling
Basic Connection-Rate Filtering Configuration
To view the complete connection-rate configuration, including any ACLs
(page 3-20), use show config (for the startup-config file) or show running (for
the running-config file). For example:
Example of a connection-rate
filtering ACL appearing in a
VLAN configuration.
Example of a connection-rate
filtering ACL appearing in the
configuration.
Example of per-port connection-rate
filtering policies appearing in the
configuration.
Entry showing that
connection-rate-filtering is
enabled and set to “medium”
sensitivity.
Figure 3-5. Example of Connection-Rate Filtering Configuration in the Startup-
Config File
3-17

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM