Removal and replacement procedures 53
Figure 29 Removing the Hard Drive Cage
6. Remove the backplane.
a. Remove all cables including optical drive cables.
b. Remove the three screws that secure the backplane to the hard drive cage.
c. Pull the backplane up and out to release it from the hard drive cage.
Figure 30
Removing the Backplane
To reinstall the backplane:
1. Orient the backplane so that the notches on the backplane align with the hook on the drive cage
and then press the backplane down until it clicks into place.
2. Secure the backplane with three screws.
To Next Page
Loading...
