HP ProLiant DL360 Generation 4

34 HP ProLiant DL360 Generation 4 Server Maintenance and Service Guide
c. Lift the front of the assembly slightly and unseat the riser boards from
the PCI riser board connectors.
To replace the component, reverse the removal procedure.
PCI Expansion Slot Definitions
Slot Board Size Connector Interconnect
PCI-X expansion slot 1 Half-length 133 MHz, 3.3 V 64-bit
PCI-X expansion slot 2 Full-length 133 MHz, 3.3 V 64-bit
PCI Express expansion
slot 1 (optional)
Half-length x8 x1, x4, or x8
PCI Express expansion
slot 2 (optional)
Full-length x8 x1, x4, or x8
PCI-X or PCI Express Expansion Board
1. Remove the PCI Riser Board Assembly ("PCI Riser Board Assembly" on
page 33
).