HP ProLiant DL360 Generation 4

70 HP ProLiant DL360 Generation 4 Server Maintenance and Service Guide
Item LED Description Status
8 PPM 2 failure Amber = PPM has failed.
Off = PPM is operating normally.
9 Processor 2 failure Amber = Processor has failed.
Off = Processor is operating normally.
10 Power supply signal
connector interlock
failure
Amber = Power supply signal cable is not
connected.
Off = Power supply signal cable is
connected.
11 Standby power
good
Green = Auxiliary power is applied.
Off = Auxiliary power is not applied.
12 Power supply fan
module failure
Amber = One fan in this module has failed.
Red = Multiple fans in this module have
failed.
Off = All fans in this module are operating
normally.
13 System diagnostic Refer to the HP Remote Lights-Out Edition II
User Guide on the Documentation CD.
14 Online spare
memory
Amber = Failover has occurred. Online spare
memory is in use.
Green = Online spare memory is enabled,
but not in use.
Off = Online spare memory is disabled.
15 Riser interlock Amber = PCI riser assembly is not seated.
Off = PCI riser assembly is seated.
System LEDs and Internal Health LED Combinations
When the internal health LED on the front panel illuminates either amber or red,
the server is experiencing a health event. Combinations of illuminated system
LEDs and the internal health LED indicate system status.