Install the server into the rack .
17. Connect all peripheral cables to the server.
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server.
ResultsResults
The installation is complete.
Memory optionMemory option
The server has four DIMM slots supporting HPE DDR5 UDIMM with ECC.
SubtopicsSubtopics
DIMM population informationDIMM population information
DIMM installation guidelinesDIMM installation guidelines
Installing a DIMMInstalling a DIMM
DIMM population informationDIMM population information
The arrow points to the front of the server.
To Next Page
Loading...
