HP ProLiant ML30 Gen11 - Optical Drive Option; Installing an Optical Drive

Install the server into the rack .
16. Connect all peripheral cables to the server.
17. Connect each power cord to the server.
18. Connect each power cord to the power source.
19. Power up the server.
20. Perform the configuration procedure required by the RDX system.
For more information, see the RDX system documentation.
ResultsResults
The installation is complete.
Optical drive optionOptical drive option
Install a slim-type SATA optical drive to read/write data on optical discs.
SubtopicsSubtopics
Installing an optical driveInstalling an optical drive
Installing an optical driveInstalling an optical drive
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Phillips No. 1 screwdriver
HPE ProLiant ML30 Gen11 Server User Guide 89