Power up the serverPower up the server
ProcedureProcedure
Press the Power On/Standby button.
Use the virtual power button through iLO 6.
Hardware options installationHardware options installation
This chapter provides instructions for installing supported hardware options. To ensure proper server deployment and operation, Hewlett
Packard Enterprise recommends installing only HPE‑validated hardware options. To see the list of validated options for this server, see the
product QuickSpecs on the HPE ProLiant ML30 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014788890https://buy.hpe.com/us/en/p/1014788890
To view the warranty for your server and supported options, see Warranty information.
SubtopicsSubtopics
Server data backupServer data backup
Hardware option installation guidelinesHardware option installation guidelines
Tower-to-rack conversion kitTower-to-rack conversion kit
Drive optionsDrive options
Power supply optionsPower supply options
Media device optionsMedia device options
PCIe fan and air baffle optionsPCIe fan and air baffle options
Storage controller optionsStorage controller options
Energy pack optionsEnergy pack options
HPE NS204i-u Boot Device optionHPE NS204i-u Boot Device option
Expansion card optionsExpansion card options
Memory optionMemory option
iLO-M.2-serial module optioniLO-M.2-serial module option
M.2 SSD optionM.2 SSD option
Internal USB device optionInternal USB device option
Server data backupServer data backup
To avoid data loss, make sure to back up all server data before installing or removing a hardware option, performing a server maintenance,
or a troubleshooting procedure.
Server data in this context refers to information that may be required to return the system to a normal operating environment after
completing a hardware maintenance or troubleshooting procedure. This information may include:
User data files
To Next Page
Loading...
