8. Connect each power cord to the power source.
9. Power up the server.
ResultsResults
The installation is complete.
Drive optionsDrive options
Depending on the drive backplane installed, the server supports the following drive types:
Non-hot-plug LFF SATA drives
Hot-plug LFF SATA and SAS drives
Hot-plug SFF SATA and SAS drives
The embedded Intel Virtual RAID on CPU (Intel VROC) supports software RAID for direct attached SATA drives.
Install an HPE type-p PCIe plug-in storage controller option to support SAS drives and hardware RAID.
SubtopicsSubtopics
Drive installation guidelinesDrive installation guidelines
Installing a non-hot-plug LFF driveInstalling a non-hot-plug LFF drive
Installing a hot-plug LFF/SFF driveInstalling a hot-plug LFF/SFF drive
Drive installation guidelinesDrive installation guidelines
Observe the following general guidelines:
The system automatically sets all drive numbers.
To Next Page
Loading...
