20. Power up the server.
21. To configure drive arrays, see the relevant storage controller guide .
ResultsResults
The installation is complete.
Installing a hot-plug LFF/SFF driveInstalling a hot-plug LFF/SFF drive
About this taskAbout this task
CAUTION:CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other static-
sensitive devices. To prevent damage, observe antistatic precautions.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
ProcedureProcedure
1. Back up all server data.
2. Remove the front bezel .
3. Remove the drive blank.
LFF drive blank
SFF drive blank
To Next Page
Loading...
