Power supply specificationsPower supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of the
following power supplies. For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard EnterpriseHewlett Packard Enterprise website website .
SubtopicsSubtopics
HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
HPE 350 W Platinum Non-hot-plug Power Supply (94% efficiency)HPE 350 W Platinum Non-hot-plug Power Supply (94% efficiency)
HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power SupplyHPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
HPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power SupplyHPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power Supply
HPE 1000 W Flex Slot Titanium Hot-plug Power SupplyHPE 1000 W Flex Slot Titanium Hot-plug Power Supply
HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
SpecificationSpecification ValueValue
Input requirementsInput requirements —
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 47 Hz to 63 Hz
Rated input current 6 A
Rated input power 400 W at 115 VAC
400 W at 230 VAC
Efficiency At 115 VAC:
No less than 87% at 100% load
No less than 90% at 50% load
No less than 87% at 20% load
At 230 VAC:
No less than 88% at 100% load
No less than 92% at 50% load
No less than 88% at 20% load
Power supply outputPower supply output —
Rated steady-state power 350 W at 115 VAC
350 W at 230 VAC
Maximum peak power 385 W at 115 VAC
385 W at 230 VAC
Rated output power 350 W
HPEHPE 350 W Platinum Non-hot-plug Power Supply (94% efficiency) 350 W Platinum Non-hot-plug Power Supply (94% efficiency)
To Next Page
Loading...
