HP ProLiant ML30 Gen11 - Install the Air Baffle; Install the Access Panel

Install the air baffleInstall the air baffle
About this taskAbout this task
The air baffle is part of the PCIe fan and air baffle option kit (P65106-B21).
ProcedureProcedure
1. Insert the baffle tabs into the slots on the rear chassis.
2. Press the front end of the baffle into the chassis.
Install the access panelInstall the access panel
ProcedureProcedure
1. Position the access panel on the chassis, and then slide it toward the front panel.
2. Tighten the access panel thumbscrew.
HPE ProLiant ML30 Gen11 Server User Guide 52