To Next Page

To Previous Page

ENGLISH

Page 15

792519-001 Edition 1

ENGLISH

3. Installation

3.3 Tower installation

M3 screws

M3 screw

3.4 Rack installation

Warning: To reduce the risk of personal injury or damage to the equipment, be sure that:

• The leveling feet are extended to the oor.

• The full weight of the rack rests on the leveling feet.

• The stabilizing feet are attached to the rack if it is a single-rack installation.

• The racks are coupled together in multiple-rack installations.

• Only one component is extended at a time. A rack may become unstable if more than one

component is extended for any reason.

Note: If preparing the rails for integrated shipping, follow the same rack installation instructions.

Note: Mounting hardware for square- and round-holed racks is included in the UPS kit.

Questions and Answers:

Need help?

Do you have a question about the HP R/T3000 G4 ERM and is the answer not in the manual?

HP R/T3000 G4 ERM Specifications

General