HP StorageWorks DAT Series User Manual

Action recommended
Additional
information
media label placement.
Click here for
information DDS media
care.
Click here for
information on ensuring
a long life for the HP
DAT product.
If the tape ejected, use the Read/Write test and the
Device Analysis test in L&TT with new media to check
that the drive is now working normally.
NOTE:
Due to issues in development Library and Tape
Tools cannot be reliably used to diagnose
potential issues with the DAT 40 Hotplug drive
(Q1546A only). This problem is currently being
investigated and will be corrected in the next
revision of Library and Tape tools. This note
will be updated once the problem has been
corrected but until then do not use Library and
Tape Tools to diagnose issues with this
product. This problem only relates to the
Q1546A product, no other DAT 40 variants are
affected.
Click here for
information on HP
Library and Tape Tools.
If tape did not eject, see "Stuck Tape
Troubleshooting" for further troubleshooting help.
See the "Stuck Tape
Troubleshooting"
section.
Back to Start of Section
Back to Top
Check if your media is ejecting after backup
Action recommended
Additional
information
If your media is ejecting after the back-up, check the
back-up application settings.
Run Device Analysis Test from Test drop down menu in HP
Library and Tape Tools (L&TT). Follow any troubleshooting
given with the test results.
NOTE:
Click here for
information on HP
Library and Tape
Tools.

HP StorageWorks DAT Series Specifications

General

Brand	HP
Model	StorageWorks DAT Series
Category	Storage
Language	English