Installing the PTM32
Multi-Unit Library Configuration (Single Master and Slave)
Figure 24 on page 32 shows how to connect a multi-unit library configuration using a single master
and a slave library configuration.
NOTE: All libraries must be powered off.
NOTE: Refer to the HP StorageWorks MSL6000 Series Tape Library User Guide for information on
connecting SCSI cables and SCSI terminators to fit your specific needs and for additional multi-unit
library and SCSI configuration information.
Figure 24 10U multi-unit library configuration (single master and slave)
WAN
WAN
(Back Side)
To Next Page
Loading...
