MSL6000 series pass-through mechanism reference guide 37
3. Enter the appropriate Service password and then touch the Validate button. Refer to the HP
StorageWorks MSL 6000 Series Tape Library User Guide for additional information on setting
passwords.
4. Press the down arrow (
T) until the Module Configuration menu option appears on the
bottom of the display (see Figure 27).
NOTE: You can move to the next sequential Library options screen by touching the down arrow
(
T). To return to the previous Library options screen, touch the up arrow (S) or Back button to
return to the Menu screen.
Figure 27 Module Configuration select screen
To Next Page
Loading...
