5. Use the df command to verify that the file systems have successfully automounted after a
reboot. Any file systems that were not automounted can be set to automount using the SMIT
Change a Journaled File System screen.
If you are using HACMP or HAGEO, do not set the file systems to automount.
Example
# df
File system 512-blocks free %Used Iused %Iused Mounted on
/dev/hd4 8192 3176 61% 652 31% /
/dev/hd2 1024000 551448 46% 6997 5% /usr
/dev/hd9var 8192 5512 32% 66 6% /var
/dev/hd3 24576 11608 52% 38 0% /tmp
/dev/hd1 8192 7840 4% 17 1% /home
/dev/lv00 4792320 4602128 4% 16 1% /hp00
/dev/lv01 4792320 4602128 4% 16 1% /hp01
/dev/lv02 14401536 13949392 4% 16 1% /hp02
HACMP and HAGEO do not provide a complete disaster recovery or backup solution and
are not a replacement for standard disaster recovery planning and backup/recovery
methodology.
98 IBM AIX
To Next Page
Loading...
