Figure 29: LFF disk drive blank
NOTE:
Removal of an SFF drive blank is similar to the example shown for the LFF drive blank.
2. Unlatch the handle by pressing the button on the disk drive.
NOTE:
Both LFF and SFF disk drives shown.
Figure 30: LFF handle release button
Figure 31: SFF handle release button
3. Swing out the latch handle on the drive. Then, slide the drive into the bay (1), pressing firmly on the drive
to seat it. Close the latch handle (2), pressing firmly until it locks into place.
54 Removing and replacing hardware components
To Next Page
Loading...
