3. Select the Imaging tab in the Task Templates pane, then double-click on the _PXE Imaging
template to display the Template Editor.
4. Select the FTP Repository where the PXE image file resides in the FTP Repository list box.
5. Select Push PXE image to device as the Action to perform.
6. Enter the name of the PXE image to push to the client in the PXE Image Name field.
NOTE: The PXE Image Name field will only list the names of PXE images if the image files have
been transferred from the FTP Repository to the Server Repository using the Repository
Management tool. However, you can manually enter the name of the image file in this field if it is
not in the Server Repository, as long as it is present in the FTP Repository you have selected in
the template.
7. Click Save as to save the template with a new name.
The template will be created and listed in the Task Templates pane ready for you to apply to
devices.
Images 135
To Next Page
Loading...
Need help?
General