Listing Subnets & their FTP's Servers
You can list subnets and their FTP servers by selecting the Subnet FTP Mapping item in the left-hand
tree pane of the Configuration Management dialog box. A color code indicates how their FTP server
was assigned:
●
Blue
Automatic mapping (factory default settings). The HP Management Server assigns an FTP server
to each subnet according to its proximity. For example, a subnet that has an FTP server will be
using that server instead of another one in the entire network.
●
Red
Uses a default FTP server, usually a server with highest broadband. The default FTP server can
be changed at any time, so that the subnets assigned “default FTP” would connect to the new FTP
server.
●
Green
Uses an FTP server specified by the administrator. For subnets where this is the case, the
administrator can change their FTP settings to automatic mapping or default.
Filtering Devices or Subnets
For companies with a large number of devices and/or subnets, the Device FTP Mapping and Subnet
FTP Mapping listings will be too long for an administrator to easily find a particular device or to see
certain aspects. You can filter these mappings so that the administrator can manage both the general
and the specific aspects of each device.
180 Chapter 7 Configuration Management
To Next Page
Loading...
Need help?
General