Power Management
The Management Console enables you to reboot, shutdown and wake a client remotely. This can be
achieved either by using the templates available on the Operations tab, or by selecting from the pop-
up menu when you right-click on a device as described below.
NOTE: To wake a client, the Wake On LAN support of the client’s BIOS must be enabled.
To shutdown, reboot, or wake a client:
1. Select a device from the Device Pane in the main Console window.
2. Right-click and select Power Management > Reboot, Wake On LAN or Shutdown from the pop-
up menu.
3. The Task Editor dialog box will appear. Click OK to perform the task.
When the client receives the task, a warning dialog box will appear on the screen of the client device to
inform the user that the device will be shutdown or restarted.
Power Management 71
To Next Page
Loading...
