To add a new device using its MAC address:
1. Select Device > Add from the Management Console menu bar.
The Add Device dialog box will appear.
2. Enter the MAC Address of the device to be added.
3. Select the Management Gateway that will connect with the device from the Neoware Management
Gateway ID drop-down list.
4. Click OK to add the device.
A new device will appear in the device tree with the name deviceX, where X is a number. This
device will appear as turned off, but you can still interact with the device. For example, you can
use Send Task to send a new Imaging template to the device, or Wake on LAN to attempt to start
up the device.
Adding Devices Using MAC Addresses 155
To Next Page
Loading...
