16. Click Next to display the Gateway Configuration dialog box.
The Management Server Address is the address for the Management Server that the
Management Gateway will report to.
The Local NIC selects which NIC the gateway will receive agent reports on. If there is only one
NIC for the system, this field can be left blank.
The Start PXE service when Gateway is started setting determines whether the PXE service will
be started along with the Management Gateway. The PXE service is always installed along with
the Gateway, but can be controlled independently of the Gateway (by changing this setting to
NO) if required. If this is set to YES, when the Gateway is stopped, the PXE service will also stop;
when the Gateway is started, the PXE service will also start.
20 Chapter 2 Installing HP Device Manager
To Next Page
Loading...
