HP UPS Network Module User Manual

Overview 10
Quick installation and setup overview
1. Install the UPS Network Module ("Installing the UPS Network Module" on page 12) and configure the
network settings ("Configuring the UPS Network Module network settings" on page 15).
2. Access the web interface.
3. Configure the power fail settings using the Shutdown Parameters screen (on page 35).
4. (optional) Configure additional settings using the menus under Settings (on page 30).
5. Install and configure the HPPP Client on all servers to be protected by the UPS. After all Clients are
configured at the servers, they are automatically added by the UPS Network Module and appear on the
Notified Applications screen (on page 40).
For more information, see the HP Power Protector User Guide on the HP website
(http://www.hp.com/go/rackandpower).

HP UPS Network Module Specifications

General

Brand	HP
Model	UPS Network Module
Category	Network Hardware
Language	English