HP UPS Network Module User Manual

HP UPS Network Module web interface 27
Up to seven shutdown and restart sequences can be scheduled in one week. The minimum time allowed
between a shutdown and restart is 30 minutes. The maximum time allowed between a shutdown and restart
is 1 week. For a valid schedule, be sure the time is set correctly on the Time Settings screen (on page 34).
To schedule shutdowns and restarts:
1. Select the time of the shutdown in the pull-down menu for the appropriate day.
2. Select the time of the restart in the pull-down menu of the appropriate day.
3. Click Save.
Click Help to view online help.
Logs
Menu options listed under Logs include:
• UPS Data Log ("UPS Data Log screen" on page 27)
• Event Log ("Event Log screen" on page 28)
• System Log ("System Log screen" on page 29)
UPS Data Log screen
Click UPS Data Log in the menu tree to display the UPS Data Log screen. This screen displays a log of UPS
data collected by the UPS Network Module. The frequency at which data is collected can be modified on the
System Settings screen (on page 30). By default, data is collected every 60 seconds.
NOTE: In the UPS Data Log and the Event Log, the date and time stamps are converted to the
local time zone.
The following information is displayed for a single phase UPS:
• AC Input Voltage—The utility voltage supplying the UPS

HP UPS Network Module Specifications

General

Brand	HP
Model	UPS Network Module
Category	Network Hardware
Language	English