HP UPS Network Module User Manual

Optional power monitoring using SNMP 51
Optional power monitoring using SNMP
SNMP monitoring
Battery status, power status, events, and traps can be monitored using third-party SNMP managers. SNMP
monitoring supports the RFC-1628 MIB and the HP Power MIB (CPQPOWER.MIB).
To query SNMP data, you do not need to add SNMP Mangers to the Notified Application page.
In the third-party SNMP manager, configure the IP address of the UPS Network Module, select SNMP V1 or
V1&V3, and then compile either CPQPOWER.MIB or UPS.MIB (RFC1628) to be monitored by the SNMP
manager.
The HP Power MIB (CPQPOWER.MIB) can be downloaded from the HP website
(http://www.hp.com/go/rackandpower).

HP UPS Network Module Specifications

General

Brand	HP
Model	UPS Network Module
Category	Network Hardware
Language	English