81
6.5.10 80BFile Numbering
This setting allows you to control the numbering of the files that are
stored on the memory card.
If “Series” is selected, the file name will be numbered sequentially.
If “Reset” is selected, the next file name will start from 0001 even
after formatting, deleting or inserting a new memory card.
1. Enter Setup menu, use the 4-Way Direction Button to
highlight File Number.
2. Press the button or touch the File Number icon on
screen to display the submenu.
3. Use the 4-Way Direction Button to select Series or Reset.
Press the button or touch the selected option on
screen to set.
To Next Page
Loading...
