How to fix HP t250 Camcorder that cannot power on?
If your HP Camcorder cannot power on, it might be due to the following reasons: * The battery is not inserted correctly, so please insert the battery correctly. * The battery is exhausted, so recharge the battery.
What to do if my HP t250 shuts down suddenly?
If your HP Camcorder shuts down suddenly, here's what might be happening: * The power saving mode may already be activated, so please turn the power on again. * The battery may be exhausted, so recharge the battery.
Why are the images from my HP t250 out of focus?
If the images from your HP Camcorder are out of focus, it could be because the object exceeds the range of focus, or the camcorder was not still during recording. Keep subjects within range and reduce camcorder movement.
Why does my HP t250 battery die so quickly now?
If the battery power of your HP Camcorder now lasts only a few minutes, it may be because rechargeable batteries wear out after a year or longer. Replace the NP-60 battery with the same type (mAh rating ` 1050 and 1700).
Why is my HP Camcorder unable to use the external memory card?
There are several reasons why your HP Camcorder might not be able to use the external memory card: * The memory card is protected, so unlock it. * The memory card contains non-DCF images taken by other cameras, so reformat the memory card after backing up the files. * The memory card type or format is not supported, so use only SD, SDHC, or micro SD memory cards.
What to do if all buttons on my HP Camcorder stop working or the camera hangs?
If all buttons on your HP Camcorder stop working or the camera hangs, it could be due to a short circuit that occurred when connecting the camera to another device. To resolve this, remove the battery and re-insert it after 10 seconds.
What to do if photos are not stored in the memory of my HP t250?
If photos are not being stored in the memory of your HP Camcorder, it might be because the camcorder was powered off before it completed storing the images. Be sure the battery is charged, and do not power off the camcorder until 5 seconds after a video or photo is recorded.
Why does my HP t250 shut down when using the self-timer?
If your HP Camcorder shuts down when using the self-timer, it is likely that the battery is exhausted. Recharge the battery.
How to fix no sound in PC video playback of HP t250 videos?
If there is no sound in PC video playback of your HP Camcorder videos, it is likely that the video file is not supported with Windows Media Player. Use Apple QuickTime or ArcSoft TotalMedia Theatre for PC playback.
Why does my HP t250 Camcorder shutdown suddenly?
If your HP Camcorder suddenly shuts down, it might be due to the power saving mode being activated. Try turning the power on again. Alternatively, the battery may be exhausted, in which case you should recharge it.
Guides on how to properly insert SD and Micro SD cards into the camcorder.
Instructs on how to insert and secure the camcorder's battery.
Explains the process of charging the camcorder's lithium battery.
Guides on setting up the camcorder for the first time, including date and time.
Provides step-by-step instructions on how to record video clips.
Guides on how to operate the camcorder for voice recording.
Explains how to play back recorded video and voice clips.
Covers the process of taking pictures and reviewing them.
Lists and explains the various menu settings available in DV Mode.
Lists settings applicable to both DV and Voice playback modes.
How to set the resolution for still images in DSC Mode.
Explains how to adjust white balance settings for DSC Mode.
How to adjust exposure value (EV) in DSC Mode.
How to delete photos in DSC Playback Mode.
How to protect photos from accidental deletion in DSC Playback Mode.
Provides detailed technical specifications of the camcorder.
Lists common problems and their solutions for the camcorder.
To Next Page
General
