HP t250 - Self-Timer

6.3.7 Self-timer
1. Power on the camcorder and make sure it is in the DSC Mode.
62
2. Touch the
icon or press the Menu Button ( ) then
touch the Self-timer option to display the submenu.
3. Touch the desired Self-timer option (Off, 2S, or 10S) to select
as illustrated below. After an option is selected, the Menu
screen will be displayed again. The default setting is off.
The image will be taken 2 seconds after the
shutter is released.
2S 2 secs.
The image will be taken 10 seconds after the
shutter is released.
10S 10 secs.
4. Touch the icon to return to DSC recording mode.