HP t250 - Initial Settings before Use; Setting Date and Time

2.7 Initial settings before use
2.7.1 Setting Date and Time
1. Turn on the camcorder to set up the date and time for the
initial use. Set the date and time by pressing the Zoom
Buttons (
) and / or touching the screen to select.
2. Press Mode Buttons ( ) or touch the indicator to
highlight each column. Use Zoom Buttons (
) to
adjust the value. Press Recording Button (
) to store your
changes, or touch the screen to adjust the date and time
before pressing the Return Button (
) to store the value
and leave the setting.
2
6