HP vc4825T - Thin Client - HP Thinstate Utility; Thinprint

To change your password:
1. Click Control Panel > Security.
2. Select Administrator or User and click Change password.
3. Type the new password in the New password and Confirmation fields and click Ok.
4. Click Ok.
ThinPrint
To use ThinPrint:
1. Select the printer you want to use and click Ok.
2. Reboot the computer so that the setting will become effective.
HP ThinState Utility
HP ThinState allows you to copy and deploy thin client settings to another HP thin client of identical
model and hardware.
●
Capture Thin Client Settings to USB Drive on page 93
●
Deploy Captured Settings from a USB Drive on page 95
●
Capture a Thin Client Full Image to a USB Drive on page 96
●
Deploy a Full Image to an FTP Site on page 97
NOTE: HP ThinState is not a standalone tool and can only be accessed by the administrator from
within the thin client image.
92 Chapter 2 Installation ENWW