Altiris Configuration
NOTE: Altiris is disabled by default. It can be activated automatically if the local area network DHCP
server provides Altiris server information through DHCP Tag 190.
To configure or disable Altiris Agent:
1. Click Control Panel > Altiris Configuration.
2. Specify the Altiris settings in the fields shown.
Or
Select Disable Altiris Agent to disable Altiris.
3. Select Use Multicast: if you want to use the default Altiris server address.
4. The default Multicast Address: is displayed. Type your installation address if necessary.
5. Type or select the Multicast Port: (Altiris server port).
6. If Use Multicast is not selected, type the specific Altiris server address in the TCP Address
field.
7. Type or select the TCP Port: (Altiris server port).
8. Click OK to save your changes and close the dialog box.
ENWW Control Panel 73
To Next Page
Loading...
Need help?
General