●
Import a profile
●
Export the current profile
To restore factory defaults:
1. Click Control Panel > Profile Manager.
2. Click restore factory defaults.
To save the current configuration:
1. Click Control Panel > Profile Manager.
2. Click Save current configuration.
To import a profile:
1. Click Control Panel > Profile Manager.
2. Click Import a Profile.
3. Browse to the profile you wish to import and click Open.
4. Click Import Profile.
The thin client will import the selected profile and restart.
To export the current profile:
1. Click Control Panel > Profile Manager.
2. Click Export current Profile.
3. Browse to the location where you would like to save the profile, type a profile name in the File
name field, and click Save.
4. Click OK to confirm export success.
ENWW Control Panel 89
To Next Page
Loading...
