34 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
ioconfig:apath path=0/4/0/0.70962; id=fc_nport
ioconfig:adev ldev=100; path=0/4/0/0.70962.0; id=hpdarray
Class(es) updated, so rerun asoctbl.pub.sys to recreate asociate.pub.sys.
BEGIN VOLUME MOUNTING ON LDEV 100 (AVR 9
UNKNOWN VOLUME MOUNTED ON LDEV 100 (AVR 15)
ioconfig:adev ldev=101; path=0/4/0/0.70962.1; id=hpdarray
Class(es) updated, so rerun asoctbl.pub.sys to recreate asociate.pub.sys.
BEGIN VOLUME MOUNTING ON LDEV 101 (AVR 9
UNKNOWN VOLUME MOUNTED ON LDEV 101 (AVR 15)
ioconfig:apath path=0/6/0/0.70962; id=fc_nport
ioconfig:adev ldev=200; path=0/6/0/0.70962.0; id=hpdarray
Class(es) updated, so rerun asoctbl.pub.sys to recreate asociate.pub.sys.
BEGIN VOLUME MOUNTING ON LDEV 200 (AVR 9)
UNKNOWN VOLUME MOUNTED ON LDEV 200 (AVR 15)
ioconfig:adev ldev=201; path=0/6/0/0.70962.1; id=hpdarray
Class(es) updated, so rerun asoctbl.pub.sys to recreate asociate.pub.sys.
BEGIN VOLUME MOUNTING ON LDEV 200 (AVR 9)
UNKNOWN VOLUME MOUNTED ON LDEV 200 (AVR 15)
ioconfig:exit
keeping to group CONFIG.SYS
Purge old configuration (yes/no)?Automatic yes
** configuration files successfully saved **
CSYLE18<PUB.SYS>:
4. Confirm with the DSTAT command and then create volume sets and
volumes on the new XP disk array devices.
To Next Page
Loading...
Need help?
General
