HP XP1024 - Page 36

36 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
9. Use the MPE/iX VOLUTIL utility to create volume sets and volumes
on the new disk array devices.
A sample I/O configuration procedure for disk array devices attached by
SCSI-FC Fabric Router is presented below. For brevity, this example
shows only relevant excerpts from the MAPPER listing:
1. Boot on the primary boot path.
Main Menu: Enter command or menu > bo pri
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
SOFT Booted.
MMSAVE Version 2.8
DUMPAREA found, save main memory to disc
ISL loaded
ISL Revision A.00.43 Apr 12, 2000
ISL>
2. Invoke ODE.
ISL> ode
3. Run MAPPER. (A/N-Class systems use MAPPER2.)