4. Use the left and right arrow keys to select the appropriate heading. Use the up and down arrow
keys to select the option you want, and press Enter.
5. To apply and save changes, select File>Save Changes and Exit.
●
If you have made changes that you do not want applied, select File>Ignore Changes and
Exit.
●
To reset to factory settings, select File>Default Setup>Restore Factory Settings as
Default. Press F10 to accept the changes. Click File>Apply Defaults and Exit. This option
restores the original factory system defaults.
CAUTION Do not turn the workstation power off while the ROM is saving your Computer Setup
Utility changes because the CMOS could become corrupted. After you exit the F10 Setup screen,
it is safe to remove all power from the workstation.
Computer Setup (F10) Utility menu
NOTE The following content is subject to change with new BIOS releases, so your menu may
be different than shown in Table 1–1.
Table 3-1 Computer Setup Utility menu descriptions
Heading Option Description
File System
Information
Lists product name, SKU number, processor type/speed/stepping, cache size (L1/L2), memory
type and size, integrated Media Access Control (MAC) IDs for Network Interface, system BIOS
type, chassis serial number, and asset tracking number.
About Displays copyright information.
System
Temperatures
Displays temperature graph.
Set Time and
Date
Enables you to set system time and date.
Replicated
Setup
Save to Removable Media
Saves the current F10 Setup configuration to a text file called cpqsetup.txt.
Restore from Removable Media
Restores previous F10 Setup configuration from a text file called cpqsetup.txt.
Default Setup Save Current Settings as Default
Stores the current F10 Setup configuration as the default.
Restore Factory Settings as Default
Restores the original factory settings to the F10 Setup configuration information as the default.
Apply Defaults
and Exit
Saves the selected default settings (previously-saved user or factory settings) and exits the
Computer Setup Utility.
Ignore
Changes and
Exit
Exits the Computer Setup Utility without applying or saving any changes.
Save Changes
and Exit
Saves changes to system configuration and exits the Computer Setup Utility.
26 Chapter 3 System management ENWW
To Next Page
Loading...
