Temperature (non-operating) -40° to 140° F (-40° to 60° C)
Humidity (operating) 8% to 85% RH, non-condensing
Humidity (non-operating) 8% to 90% RH, non-condensing
Maximum Altitude (operating) 0 to 10,000 ft. (3,048 m)
Maximum Altitude (non-operating) 0 to 30,000 ft. (9,144 m)
Shock (operating) 1/2-sine: 40 G, 2–3 ms
Shock (non-operating) 1/2-sine: 160 cm/s, 2−3 ms, (approximately 100 G)
square: 605 cm/s, 30 G
NOTE Values represent individual shock events and
are not indicative of repetitive shock events.
Vibration (operating) Operating random: 0.5 G (rms), 5−300 Hz
Vibration (non-operating) Random: 2.0 G (rms), 10−500 Hz
NOTE Values are not indicative of continuous
vibration.
* Operating temperature is specified at 5° to 35° C from sea level to 5000 ft. with an altitude derating
of 1.0° C per every 300 m (1000 ft.) above 5000 ft. to a maximum of 3000 m (10,000 ft.), no direct
sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type
and number of options installed.
PCI card slot power specification
Table 1-11 PCI and PCI Express slot power specifications
Slot# Slot Type Slot Power (Maximum)
1 PCI Express x16 (x8) 25 W*
2 PCI Express x16 graphics 150 W**
3 PCI 32 bit, 33 MHz 25 W*
4 PCI Express x16 (x8) 25 W*
5 PCI Express x16 graphics 150 W**
6 PCI-X 100 25 W*
7 PCI-X 100/133 25 W*
* In addition to these slot power specifications, the overall power consumption of the system (including
I/O cards, processor, and memory) must not exceed the maximum ratings of the system power
supply. See
Power supply specifications on page 7 for details.
** Includes 75 W maximum from the system board connector, and 75 W maximum from the auxiliary
graphics power connector.
Table 1-10 Environmental Specifications (continued)
10 Chapter 1 Product overview ENWW
To Next Page
Loading...
