B SATA devices
This appendix describes how to use the NVIDIA MediaShield utility to set up and manage SATA RAID
volumes.
The SATA RAID option must be enabled in BIOS and the SATA drives must be attached to the
workstation ports to configure them into a RAID array.
Attach the required number of SATA HDDs for the desired RAID level:
●
RAID 0–two to six HDDs–data is striped across drives for performance
●
RAID 1–two HDDs–data is mirrored on two drives for security
●
RAID 5–three to six HDDs–data is striped across drives with parity for performance with security
●
RAID 10–four to six HDDs–data is mirrored and striped across all drives for security and some
performance
ENWW 145
To Next Page
Loading...
