2 HP Z1 G2 Workstation features
The HP Z1 G2 Workstation is offered in both a touch and a non-touch model. The touch model has a glossy
glass front, and the non-touch model has a matte surface, surrounded by a plastic bezel.
For complete and current information on supported accessories and components for the workstation, go to
http://partsurfer.hp.com.
Components
Front and bottom components
1 Camera angle adjustment dial 5 Serial number pull-out card
2 Camera 6 Speakers
3 Left and right digital microphones 7 Stand
4 Display panel 8 Chassis latches (bottom view)
6 Chapter 2 HP Z1 G2 Workstation features