10 Routine Care
The cleaning methods listed below are applicable to both the touch and the non-touch models of the HP Z1
G2 Workstation.
General cleaning safety precautions
●
Never use solvents or flammable solutions to clean the workstation.
●
Never immerse any component in water or cleaning solutions; apply any liquids to a clean cloth and
then use the cloth on the workstation.
●
Always unplug the workstation before cleaning the keyboard, mouse, or air vents.
●
Always disconnect the keyboard before cleaning it.
●
Wear safety glasses equipped with side shields when using compressed air, to prevent dust and debris
from getting into your eyes.
Cleaning products
Use the following products to safely clean your workstation:
●
Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration, usually in the form of
disposable wipes in a variety of brand names
●
Alcohol-free glass cleaning fluid
●
Water with mild soap solution
●
Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)
●
Static-free cloth wipes
CAUTION: Avoid strong cleaning solvents that can permanently damage your workstation. If you are
not sure if a cleaning product is safe for your workstation, check the product contents to be sure that
ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are
not included.
●
Fibrous materials, such as paper towels, can scratch the workstation. Over time, dirt particles and
cleaning agents can get trapped in the scratches.
General cleaning safety precautions 63
To Next Page
Loading...
Need help?
General
