HP Z1 G2 User Manual

◦
Use a different network cable to connect your workstation to the network.
◦
Connect a different workstation with a different cable to the network.
If your problem is not resolved, the network jack on your workstation or the network wall jack might be
faulty.
●
If you recently added new hardware, remove the hardware.
●
If you recently installed new software, uninstall the software.
●
Comprehensive online technical support is also available at
http://www.hp.com/support.
●
If the workstation will turn on but will not boot into the operating system, you may run the “pre-boot”
diagnostics utility, HP PC Hardware Diagnostics.
●
If the workstation will boot into the operating system, there are two possible tools that provide self-
solve diagnostics and online chat features (if internet access is also available).
◦
If you have HP Support Assistant, you may access it from the Start screen by clicking the HP
Support Assistant app, clicking My computer, and then clicking Diagnostics.
◦
If you do not have HP Support Assistant installed, you may access HP Instant Support Professional
Edition at
http://www.hp.com/go/ispe.
You may also access the Business Support Center (BSC) at
http://www.hp.com/go/bizsupport for the latest
online support information, software and drivers, for proactive notification, and access to a worldwide
community of peers and HP experts.
Comprehensive online technical support is also available at
http://www.hp.com/support.
If it becomes necessary to call for technical assistance, be prepared to do the following to ensure that your
service call is handled properly:
●
Be in front of your workstation when you call.
●
Before calling, write down the product ID number, workstation and monitor serial numbers, and the
failure ID produced by running the diagnostics if applicable.
●
Spend time troubleshooting the problem with the service technician.
●
Remove any hardware that was recently added to your system.
●
Remove any software that was recently installed.
NOTE: For sales information and warranty upgrades (HP Care Packs), call your local authorized service
provider or dealer.
Backing up, restoring, and recovering in Windows 10
This section provides information about the following processes. The information in the section is standard
procedure for most products.
●
Creating recovery media and backups
●
Restoring and recovering your system
For additional information, see Help and Support.
▲
Type help in the taskbar search box, and then select Help and Support.
44 Chapter 6 Setting up, backing up, restoring, and recovering Windows 10

HP Z1 G2 Specifications

General

Brand	HP
Model	Z1 G2
Category	Desktop
Language	English