Thank you for purchasing the Tiger SHARK
™
computerized code machine.
We appreciate your business. We are confident your investment in this
machine will pay off in increased productivity and in the ability to better serve
your customers.
The Tiger SHARK
™
is the culmination of thousands of hours of research and
development. This machine combines a state of the art, computer controlled
code cutting key machine with the most extensive key code database ever
compiled, plus the touch screen user interface. In addition, HPC’s master
keying (MasterKing
®
) and key management (KeyTrail
®
) software programs will
download key cutting data to the Tiger SHARK
™
, providing a comprehensive
computerized solution to key control. Please complete and return the enclosed
registration card. It is imperative to register your machine with HPC.
As a registered owner of the Tiger SHARK
™
, you will receive notices of updates
and upgrades to the machine, as well as access to our technical support.
If you have any questions about your Tiger SHARK
™
, please contact our
Customer Service Department at:
TM
This manual and the internal software and data of theTiger SHARK
™
described in this manual are
copyrighted by: HPC, a Hudson Lock Company, Hudson, MA 01749 USA
The internal software and data is a work fully protected by the United States Copyright Laws.
Federal Law: This manual or the internal software of the Tiger SHARK
™
may not be copied,
translated, photocopied, microfilmed, or reproduced in any form (in whole or in part), without the
express written consent of the copyright holder.
HPC, a Hudson Lock Company
Hudson, MA, USA
© Copyright 2015
1.1 Introduction
To Next Page
Loading...
