Need help?Do you have a question about the HPC Tiger SHARK and is the answer not in the manual?
Provides an overview of the Tiger SHARK™ computerized code machine and its benefits.
Lists all standard accessories included with the Tiger SHARK™ machine.
Identifies and labels the various components of the Tiger SHARK™ machine.
Details the initial setup and calibration procedures required before operating the machine.
Explains the functionality, usage, and care of the Tiger SHARK™ touch-sensitive display screen.
Describes the six standard cutter wheels supplied with the Tiger SHARK™ and their applications.
Explains when and why cutter wheels need to be replaced due to wear or sharpening.
Provides step-by-step instructions for safely and correctly changing cutter wheels on the machine.
Details how to properly load a key blank into the machine's jaws for accurate cutting.
Explains the standard procedures for gauging keys using shoulder and tip methods.
Describes the features and usage of the machine's four-way jaws for holding various key types.
Guides users on how to cut keys using Depth & Space Data (DSD) numbers.
Explains the process of cutting keys by searching and entering specific code numbers.
Details how to cut specific key types like Medeco®, Tubular, and Tibbe keys.
Instructions for programming and managing custom DSD presets for frequently cut keys.
How to make temporary or permanent adjustments to DSD parameters, including cut styles.
Guide to creating and storing your own original DSDs for proprietary or restricted locks.
Procedures for performing auto-calibration and fine-tuning machine settings for accuracy.
Step-by-step instructions for decoding a cut key using the machine's decode feature.
Accessing operations like screen calibration and updating machine software.
Setting up password protection for accessing certain machine functions and screens.
To Next Page
General